It is very important to take accurate measurements, this will ensure the success of your project.

* Please record all your measurements in inches (102", not 8' 6")

STEP 1:
Measure your space from wall to wall. It is suggested to measure your walls at three different heights (at the floor, at the ceiling and at 48" from the floor). Record the smallest dimension.

STEP 2:
Measure the details of each wall section. All windows and doors should be measured from the outer edge of the casing or trim. All wall sections should be measured from the corner of the wall to the first obstacle (window, door, or opening - remember to stop at the window or door trim).

STEP 3:
Now that you have your overall dimensions and your detailed dimensions it is time to check your work. Add up all the detailed dimensions from Step 2 and verify that the total is equal to the overall wall dimensions from Step 1. If they do not equal you must re-measure.

STEP 4:
Determine your ceiling height by measuring from floor to ceiling in several locations. Record the smallest dimension.

STEP 5:
If your kitchen space has soffits/bulkheads you must measure the height and depth.

STEP 6:
Note the location of your appliance hook-ups and plumbing.

STEP 7:
Once you finalize all your measurements and ensure that they are accurate please sketch your space and note your dimensions on the grid paper (click to download). Remember to note the location of your hook-ups and plumbing. Also, please note important information such as ceiling height, soffit size, applicance sizes on the information form (click to download).

STEP 8:
Take and send any pictures that you think may be helpful to us in understanding your space and will assist us in the design process (optional).

STEP 9:
Fax your information to 717-677-7960 to begin the design process. Or mail to:
Accent Building Products
P.O. Box 310
Arendtsville, PA 17303

Need Help?
Call: 800-237-7470
Email: design@accentbuildingproducts.com

Important Note: Since Accent Building Products cannot take site measurements, it is your responsibility to double check the dimensions of your space to ensure that our layout will work properly in your space.