VELUX Skylight Accessories

ZXT-200 Rod for Manual Blind Operation

3' - 6' telescopic rod for operating 2010 and later manual Velux skylight blinds. If you require a rod for older blinds please choose either the ZCT-300 or the ZMT-300 below.

Works with 2010 and newer FS, FCM, & QPF manual blinds

ZCT-300 Telescopic Rod

6' - 10' telescopic rod for operating out of reach manual venting units, and their blinds with a smooth-turning operation.

Works with 2010 an newer VS & VCM skylights and blinds as well as pre-2010 FS and FCM blinds.

ZMT-300 Motorized Telescopic Rod

6' - 10' telescopic rechargeable, battery-operated rod allows easy operation of manual venting units.

Works with 2010 and newer VS & VCM skylights and blinds as well as pre-2010 FS and FCM blinds.

ZCT-100 3' Rod Extension

Extends all control rods an additional 3'.

Works with ZXT-200, ZCT-300, & ZMT-300.

ZZZ-202 Hook

Used in conjunction with rod to operates out-of-reach VS skylights.

Works with 2010 and newer VS skylights.

ZZZ-211 Hook

Used in conjunction with rod to operates out-of-reach VCM skylights.

Works with 2010 and newer VCM skylights.

ZZZ-201 VS Crank Handle

Used to operate VS skylights that are within-reach.

Works with 2010 and newer VS skylights.

ZZZ-212 VCM Crank Handle

Used to operate VCM skylights that are within-reach..

Works with 2010 and newer VCM skylights.

KLI 110 Basic Remote Control

No wiring needed for this RF keypad! Enjoy the simple operation of skylights and blinds by mounting this keypad wherever you desire it to be.

Works with 2010 and newer VSE, FS, VCE, FCM, and QPF

KLF-100 Home Automation Integration Kit

The KLF 100 home automation integration kit provides two advanced functions. It acts both as a repeater that extends the RF range for large spaces, as well as a home automation integration kit.

KLB-100 Battery Backup

The Battery backup provides limited operation of VSE and VCE skylights in the case of a power failure.

ZZZ-199 FCM Accessory Tray

The ZZZ 199 sunscreen accessory tray is needed to install a blind into an FCM skylight. This tray allows for the new Velux "Pick & Click" blind installation method to be used on the fixed curb mount skylights. If you need a blind for an older FCM skylight please contact us at 800-237-7470.

Works with new (2010) FCM models only.

Please purchase the Accessory Tray directly from the FCM skylight page.

This item must be selected according to the size skylight it will go on to.

ZZZ-213A Skylight Trim Kit

The trim kit provides a clean interior finish when replacing older "flush-mount" or "drop-in" style skylights or roof windows. It can be completely installed from roof, no interior trim work necessary. One size fits skylights up to an outside frame dimension of 47 1/4" by 55".

*Please click here for more specific information regarding the trim kit.